Sanyo PLC-XU45, Service Manual

Page: 32 / 115

-32-
2 LP05_B_GAIN 128 0 ~ 255
3 TURBO_GAIN 19 0 ~ 255
Group: 10 Option
0 Lamp Time Monitor - - Read only
1 RS232C Baudrate 0 0 ~ 1 0: 19200bps 1: 9600bps
2 Shootout Mode 0 0 ~ 2 1:Mode-1(change when no signal) 2:Mode-2(AV-priority) 0: Disable
3 Cooling Time 3 0 ~ 15 Cooling time periods 1: 30 sec. 3: 90sec.15: 450sec. 0: continuos-on
4 Hi-Land SW 0 0 ~ 1 0:Normal mode(Normal operation) 1:Highland mode (Fan max speed)
5 V-Douki SW 0 0 ~ 1 0: V-sync 1:no V-sync
6 Color Shading SW 1 0 ~ 1 Color shading correction 0: On 1: Off Not memorized
7 MCI Output Auto 1 0 ~ 1 1: Auto for output from MCI 0: Fixed output to Panel size
8 Keystone Option 0 0 ~ 1 0: Fixed Limitation 1: Vary limitation at Input
9 Syukka SW 0 0 ~ 10 Reset control values when this value reaches 10.
10 Power Fail Monitor 0 0 ~ 10 Read only
11 MUPO Option 0 0 ~ 4 0: 90ºC1: 53ºC 2: 37ºC: 28ºC 4: 13ºC
Group: 11 Fan Control
0 Fan Speed Mode 0 0 ~ 3 0:FanControl-On 1:min 2:Mid 3:Max Adjustable but not memorized
✻
Fan Control Adjustment
1 Fan-1 Min Data 44 0 ~ 127 Decides minimum output data at fan control.
✻
Fan Control Adjustment
2 Fan-2 Min Data 63 0 ~ 127 Decides minimum output data at fan control.
✻
Fan Control Adjustment
3 Fan-1 Max Data 217 128 ~ 255 Decides maximum output data at fan control.
✻
Fan Control Adjustment
4 Fan-2 Max Data 236 128 ~ 255 Decides maximum output data at fan control.
✻
Fan Control Adjustment
5 Temp Low 37 10 ~ 80 Data to decide the DAC output for Temp.
6 Temp High 45 30 ~ 80 Compensates linearly DAC min. at the value of Temp Low and DAC max. at the Temp High.
7 Fan-1 Temp Error 56 30 ~ 80 Temperature to judge the abnormal temp. for cabinet, optical and Man unit.
8 Fan-2 Temp Error 48 30 ~ 80 Temperature to judge the abnormal temp. for external temp and other unit.
9 Fan-1 Speed Monitor - 0 ~ 255 Read only (cabinet, optical, Man unit)
10 Fan-2 Speed Monitor - 0 ~ 255 Read only (External temp, other unit)
11 Temp Monitor - 0 ~ 9999 Read only, upper 2 bytes for Fan-1 and lower 2 types for Fan-2.
12 Eco Mode Fan-1 Min Data 229/229 0 ~ 255 Eco Mode Deferential value from standard(0: ±0, 1:+1, 255:-1)
13 Eco Mode Fan-2 Min Data 229/197 0 ~ 255 *Depending on the type of lamp. (Osram/Philips)
14 Eco Mode Fan-1 Max Data 182/182 0 ~ 255
15 Eco Mode Fan-2 Max Data 182/182 0 ~ 255
Group: 12 PC Real / AV Cinema
0 PC Real Contrast 32 0 ~ 63
1 PC Real Brightness 32 0 ~ 63
2 PC Real Red 32 0 ~ 63
3 PC Real Green 32 0 ~ 63
4 PC Real Blue 32 0 ~ 63
5 PC Real Gamma 8 0 ~ 15
6 AV Cinema Contrast 32 0 ~ 63
7 AV Cinema Brightness 32 0 ~ 63
8 AV Cinema Color 32 0 ~ 63
9 AV Cinema Tint 32 0 ~ 63
10 AV Cinema Red 32 0 ~ 63
11 AV Cinema Green 32 0 ~ 63
12 AV Cinema Blue 32 0 ~ 63
13 AV Cinema Sharpness 15 0 ~ 31
14 AV Cinema Gamma 8 0 ~ 15
Group: 500 ADC
0 ADC R-OFFSET 128 0 ~ 255
1 ADC G-OFFSET 128 0 ~ 255
2 ADC B-OFFSET 128 0 ~ 255
3 ADC R-GAIN 254 0 ~ 255
4 ADC G-GAIN 254 0 ~ 255
5 ADC B-GAIN 254 0 ~ 255
6 ADC BandWidth PC 3 0 ~ 3
7 ADC BandWidth AV 3 0 ~ 3
Group: 510 NTSC Gakaku
0 NTSC TOTAL DOTS 2626 0 ~ 2047
1 NTSC DISP DOTS 1024 0 ~ 2047
2 NTSC H BACK PORCTH 230 0 ~ 2047
3 NTSC V BACK PORCTH 46 0 ~ 2047
4 NTSC DISP LINE 456 0 ~ 2047
5 NTSC CLAMP 4 0 ~ 2047
Group: 511 PAL Gakaku
0 PAL TOTAL DOTS 2694 0 ~ 2047
1 PAL DISP DOTS 1024 0 ~ 2047
2 PAL H BACK PORCTH 266 0 ~ 2047
3 PAL V BACK PORCTH 62 0 ~ 2047
4 PAL DISP LINE 533 0 ~ 2047
5 PAL CLAMP 4 0 ~ 2047
Group: 512 HDTV 1080i-60 Gakaku
0 TOTAL DOTS 1206 0 ~ 2047
1 DISP DOTS 1024 0 ~ 2047
2 H BACK PORCTH 145 0 ~ 2047
No. Adjustment Item Initial Value Range Input source / Description
Electrical Adjustments