Sanyo PLC-XU32, Service Manual

Page: 17 / 112

-17-
1
Remove 4 screws
A
and take the LCD/Prism ass’y off
upward from the optical unit.
2
Remove each screw
B
and take the glass off upward.
Note: Models PLC-XU37 and XU38 have a pre-polarized
glass for the green panel is mounted in front of the polarized
glass-out (G) as Fig.7-3.
LCD Panel/
Prism Ass’y
Note:
Do not replace the LCD panel
separately otherwise it can
not obtain proper picture.
1
Remove 9 screws to take the Optical Unit Top off upward.
Fig.7-
1
Fig.8
Polarized Glass-Out/Pre-Polarized Glass
removal
Optical Unit Top removal
Optical Parts Disassemblies
A
A
A
Optical Unit Top
Polarized
Glass-Out
LCD Panel/Prism
Ass’y
Fig.7-
2
* Glasses should be placed as the
film attached side comes to the
LCD panel side.
LCD Panel
B
Polarized Glass-Out(G)
Pre-Polarized Glass
Fig.7-
3
* Model PLC-XU37, XU38 only