PLC-XU305A/355A Expand Serial Command Functional Specifications
30/68
8.7.7
CF_HSCALE Command
Command “CF_HSCALE_%1”[CR]
%1
“032” --------- +32
“031” --------- +31
：
“002” --------- +2
“001” --------- +1
“000” --------- +0
“-01” ---------- -1
“-02” ---------- -2
：
“-31” ---------- -31
“-32” ---------- -32
“UP” ---------- Horizontal Scale setting value + 1
“DN” ---------- Horizontal Scale setting value - 1
Details
Set Horizontal Scale
This command is available in normal Power ON status.
Note1) When Screen setting is not in Custom mode, projector changes image
mode into Custom by receiving this command.
Note2) When there is no signal detected, projector returns 101 and the command
does not execute.
Response
Acceptable
“000”[CR]
Unacceptable “Error Code”[CR]
8.7.8
CF_HPOS Command
Command “CF_HPOS_%1”[CR]
%1
“015” --------- +15
“014” --------- +14
：
“002” --------- +2
“001” --------- +1
“000” --------- +0
“-01” ---------- -1
“-02” ---------- -2
：
“-14” ---------- -14
“-15” ---------- -15
“UP” ---------- Horizontal Position setting value + 1
“DN” ---------- Horizontal Position setting value - 1
Details
Set Horizontal Position
This command is available in normal Power ON status.
Note1) When Screen setting is not in Custom mode, projector changes image
mode into Custom by receiving this command.
Note2) When there is no signal detected, projector returns 101 and the command
does not execute.
Response
Acceptable
“000”[CR]
Unacceptable “Error Code”[CR]
