PLC-XU305A/355A Expand Serial Command Functional Specifications
10/68
5. Functional Execution Command Table
5.1 Image Command Table
Execute command
Item
CF_BRIGHT_%1[CR]
Set Brightness value
CF_CONT_%1[CR]
Set Contrast value
CF_COLOR_%1[CR]
Set Color value
CF_TINT_%1[CR]
Set Tint value
CF_SHARP_%1[CR]
Set Sharpness value
CF_GAMMA_%1[CR]
Set Gamma value
CF_WBAL-R_%1[CR]
Set White Balance Red value
CF_WBAL-G_%1[CR]
Set White Balance Green value
CF_WBAL-B_%1[CR]
Set White Balance Blue value
CF_COLTEMP_%1[CR]
Set Color Temp. value
CF_PROGV_%1[CR]
Set /Cancel Progressive Scan
CF_NZRED_%1[CR]
Set/Cancel Noise reduction
CF_IMAGE_%1[CR]
Set Image mode
CF_IMAGEADJ_%1[CR]
Reset/Store for Image Adjustment
5.2 PC Adjust Control Command Table
Execute command
Item
CF_FSYNC_%1[CR]
Set Fine Sync value
CF_TDOTS_%1[CR]
Set Total Dots value
CF_CLAMP_%1[CR]
Set Clamp Value
CF_H-POS_%1[CR]
Set Horizontal Position value
CF_V-POS_%1[CR]
Set Vertical Position value
CF_DDOTS_%1[CR]
Set Display Dots value
CF_DLINE_%1[CR]
Set Display Line value
CF_PCSTORE_%1[CR]
Store current values of PC Adjust at Mode 1-5
CF_PCMODEFREE_%1[CR]
Release registered values of Mode1-5.
5.3 Input Control Command Table
Execute command
Item
CF_INPUT_%1[CR]
Select Input
CF_SOURCE_%1[CR]
Select Input Source
CF_INPUT1 _%1[CR]
Select computer-1 and set Input selected in %1
CF_INPUT2_%1[CR]
Select computer-2 and set Input selected in %1
CF_INPUT3_%1[CR]
Select Video and set Input selected in %1
CF_INPUT4_%1[CR]
Select S-video and set Input selected in %1
CF_INPUT5_%1[CR]
Select Network and set Input selected in %1
CF_INPUT_%1_%2[CR]
Select Input and Source
CF_SYSTEM_%1[CR]
Select System
5.4 Screen Command Table
Execute command
Item
CF_SCREEN_%1[CR]
Select Screen size
CF_DZCENT_%1[CR]
Cancel Digital Zoom mode
CF_KEYSTONE_%1[CR]
Set Keystone
CF_KYSTNMODE_%1[CR]
Set Keystone Store mode
CF_VSCALE_%1[CR]
Set value of Vertical scale
CF_VPOS_%1[CR]
Set value of Vertical position
CF_HSCALE_%1[CR]
Set value of Horizontal scale
CF_HPOS_%1[CR]
Set value of Horizontal position
