Sanyo PLC--XP200L Page 75 Owner'S Manual Download

Page: 75 / 88

Indicators and Projector Condition

Check the indicators for the projector condition.

Indicators

Projector Condition

POWER

green

LAMP/

SHUTTER

red/blue

WARNING

TEMP.

red

WARNING

FILTER

orange

LAMP

REPLACE

orange

The projector is off. (The AC power cord is unplugged.)

The projector is in stand-by mode. Press the ON/STAND-BY

button to turn on the projector.

The projector is operating normally.
(The shutter is open)

The projector is operating normally.
(The shutter is closed)

The projector is preparing for stand-by or the projection lamp

is being cooled down. The projector cannot be turned on until

cooling is completed and the POWER indicator lights green.

The projection lamp is being cooled down in the Power

management mode.

The projector is in the Power management mode.

The projection lamp is being cooled down in the Shutter

management mode.

The projector is in the Shutter management mode. Press the

ON/STAND-BY button to turn on the projector.

The filter is scrolled using the FILTER button on the remote

control or the Filter control function in the setting menu.

When the filter is being scrolled, the Filter replacement icon

and “Please wait...” message (Fig. 1) appear on the screen for

about 30 seconds.

The projector is operating normally .

• • • on

• • • off

• • • blinking at the normal rate

(approx. 1 second ON,
1 second OFF)

• • • dim

• • • blinking slow

(approx. 2 seconds ON,
2 seconds OFF)

✽

Appendix

Fig .1

Filter replacement icon and “Please wait...”

• • • on (blue)

❊

• • • blinking at the normal rate (blue

and dim red) (approx. 1 second
ON, 1 second OFF)

❊

• • • blinking fast

(blue and dim red)

(approx. 0.5 seconds ON, 0.5
seconds OFF)

• • • blinking fast

(approx. 0.5 seconds ON,
0.5 seconds OFF)

• • • on (red)

❖

• • • dim (red)

❖

✽

❊

❖

✽

❖

❊

✽

• • • Differ according to conditions.

✽

Summary of Contents for PLC--XP200L

























































































Search results

Summary of Contents for PLC--XP200L

Reviews:

Related manuals for PLC--XP200L

Brands by name

Popular brands

Sanyo PLC--XP200L, Owner'S Manual

Search results

Summary of Contents for PLC--XP200L

Reviews:

Related manuals for PLC--XP200L

Brands by name

Popular brands