Sanyo PLC--XP200L Page 19 Owner'S Manual Download

Page: 19 / 88

When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the

sales dealer for detailed information of the optional lens specifications.

Lens Installation

Shift the lens to the center position by using the

Lens shift function (p. 30).

1
2

Removing the lens

Top cover release button

CAUTION

Be careful when handling the lens. Do not

drop.

Top cover

Light-block sheet

Installation

While pressing the top cover release button on

the top cover, slide the top cover toward front to

remove it.

Slide the light-block sheet upward and remove it.

Hold the lens with one hand and pull the Lens

Lock Lever upward with the other hand. Remove

the lens from the projector.

✽

Do not touch the glass part of the lens with your

hand.

Turn off the projector and unplug the AC power

cord.

Summary of Contents for PLC--XP200L

























































































Search results

Summary of Contents for PLC--XP200L

Reviews:

Related manuals for PLC--XP200L

Brands by name

Popular brands

Sanyo PLC--XP200L, Owner'S Manual

Search results

Summary of Contents for PLC--XP200L

Reviews:

Related manuals for PLC--XP200L

Brands by name

Popular brands