Sanyo PLC-XM80, Owner'S Manual, Page: 45 / 89

45
If the projector cannot reproduce proper video image, select a
specific broadcast signal format from among
PAL , SECAM , NTSC ,
NTSC 4 .4 , PAL-M , and PAL-N .
The projector automatically detects an incoming video signal, and
adjusts itself to optimize its performance.
When the Video System is
105i, 1080i or 1080p , select the
system manually.
If the projector cannot reproduce proper video image, select a
specific component video signal format from among
480i , 575i ,
480p , 575p , 70p , 105i, 1080i, and 1080p .
Video jack or S-video jack
The projector automatically detects an incoming video system, and
adjusts itself to optimize its performance.
When Video System is
PAL-M or PAL-N , select the system
manually.
Video Input
1
AV System Menu (Video or S-video)
AV System Menu (y, Pb/Cb, Pr/Cr)
Input 1 RGB(PC analog)
Input 2 RGB
Input 3 Y, Pb/Cb, Pr/Cr
System Auto
Press the MENU button to display the On-Screen Menu. Use
the Point
pq
buttons to select Input and then press the Point
u or the SELECT button.
Use the Point pq buttons to select Video , S-video or Computer
1(Component) and then press the SELECT button.
Use the Point pq buttons to select System and then press
the Point
u
or the SELECT button. Use the Point
pq
buttons
to select the desired system and then press the SELECT
button.
P
Note:
The AV System Menu cannot be selected when selecting
RGB (Scart) .
Video System Selection
Auto
y, Pb/Cb, Pr/Cr jacks
PAL/SECAM/NTSC/NTSC4 .4/PAL-M/PAL-N
Auto
y, Pb/Cb, Pr/Cr SIGNAL FORMAT