Sanyo PLC-XM80, Owner'S Manual, Page: 41 / 89

41
Computer Input
Image adjust Menu
Press the MENU button to display the On-Screen Menu.
Use the Point
pq
buttons to select Image adjust and
then press the Point
u
or
the SELECT
button.
1
Use the Point
pq
buttons to select the desired item
and then press the SELECT button to display the
adjustment dialog box. Use the Point
t u
buttons to
adjust the setting value.
P Note:
When White balance Red, Green or Blue is
adjusted, Color temp. will change to Adj. .
Press the Point
t
button to decrease the contrast; press the Point
u button to increase the contrast (from 0 to 63).
Press the Point
t
button to decrease the brightness; press the
Point u button to increase the brightness (from 0 to 63).
Press the Point
t
button to lighten red tone; press the Point
u
button to deepen red tone (from 0 to 63).
Press the Point
t
button to lighten green tone; press the Point u
button to deepen green tone (from 0 to 63).
Press the Point
t
button to lighten blue tone; press the Point u
button to deepen blue tone (from 0 to 63).
Use the Point t u buttons to select the desired Color temp. level
(XLow, Low, Mid or High).
Use the Point t u buttons to adjust the gamma value to obtain a
better balance of contrast (from 0 to 15).
Press the Point
t
button to decrease the sharpness of the image;
press the Point u button to increase the sharpness of the image
(from 0 to 31).
Contrast 32
Brightness 32
Color temp. High
Red 28
Green 32
Blue 35
Offset
Sharpness 8
Gamma 8
Reset
Store
Contrast 32
Brightness 32
Color temp. High
Red 28
Green 32
Blue 35
Offset
Sharpness 8
Gamma 8
Reset
Store
Use the Point
t u
buttons to adjust the
setting value.
Selected Image mode
Press the Point
t
button to lighten red/green/blue tone of the black
level of an image; press the Point
u
button to deepen red/green/
blue tone of the black level of an image.
Image Adjustment
Contrast
Brightness
Color temp .
White balance (Red)
White balance (Green)
White balance (Blue)
Offset(Red/Green/Blue)
Sharpness
Gamma