Sanyo PLC-XE50A Owner'S Manual Download

Page: 64 / 70

Appendix

The projector is detecting abnormal condition.

Indicators

Projector Condition

POWER

red/green

WARNING

TEMP.

red

WARNING

FILTER

orange

LAMP

REPLACE

yellow

The temperature inside the projector is abnormally high. The projector

cannot be turned on. When the projector is cooled down enough and

the temperature returns to normal, the POWER indicator lights red

and the projector can be turned on. (The WARNING indicator keeps

blinking.) Check and clean the air filters.

The projector has been cooled down enough and the temperature

returns to normal. When turning on the projector, the WARNING

indicator stops blinking. Check and clean the air filters.

The projector detects an abnormal condition and cannot be turned on.

Unplug the AC power cord and plug it again to turn on the projector. If

the projector is turned off again, unplug the AC power cord and contact

the dealer or the service center for service and checkup. Do not leave

the projector on. It may cause an electric shock or a fire hazard.

The Filter counter reached a set time. Clean or replace the filter as

soon as possible.

✽

red

✽

When the projection lamp reaches the end of its life, the LAMP REPLACE indicator lights yellow. When this

indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement

counter after replacing the lamp. See pages 56-57.

LAMP REPLACE

Summary of Contents for PLC-XE50A







































































Search results

Summary of Contents for PLC-XE50A

Reviews:

Related manuals for PLC-XE50A

Brands by name

Popular brands

Sanyo PLC-XE50A, Owner'S Manual

Search results

Summary of Contents for PLC-XE50A

Reviews:

Related manuals for PLC-XE50A

Brands by name

Popular brands