Sanyo PLC-XD2200, Owner'S Manual

Page: 22 / 78

22
Computer 1 RGB
Computer 2 RGB
Video
►
ƘƘƘ
Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 68-69.
Basic Operation
①
②
③
④
⑤
⑥
⑦
⑧
Main Menu Sub-Menu
⑨
⑩
③
Image select
For computer source, used to select an image mode from among
Dynamic
,
Standard
,
Real
,
Blackboard(Green)
,
Colorboard and image 1 - 4 (p.32).
For Video source, used to select an image mode among
Dynamic
,
Standard
,
Cinema
,
Blackboard(Green)
,
Colorboard
and Image 1- 4 (p.39).
④ Image adjust
For computer source, used to adjust computer image [ Contrast , Brightness , Color temp . , white balance (R/G/B) ,
Sharpness and Gamma ] (pp.33-34).
For Video source, used to adjust picture image [ Contrast , Brightness , Color , Tint , Color temp . , white balance (R/G/
B) , Sharpness , Gamma , Noise reduction and Progressive ] (pp.40-41).
②
PC adjust
Select Auto PC adj . , Fine sync , Total dots , Horizontal , Vertical , Current mode, Clamp , Display area-H and Display
area-V to adjust the parameters to match with the PC input signal format (pp.29-31).
⑤ Screen
For computer source, used to adjust size of the image [ Normal , True , wide, Full , Custom , Custom adj . and Digital
zoom +/– ] (pp.34-35).
For Video source, used to set size of image [ Normal , wide , Custom and Custom adj .] (p.42).
①
Input
Used to select an input source from Computer 1 , Computer 2 or Video
(pp.27, 36-37).
⑥
Sound
Used to adjust the volume or mute the sound (p.24).
⑧
Information
Display the input source information: Input , H-sync freq . , V-sync freq . , Screen , Language , Lamp status , Lamp
counter , Power management , Key lock , PIN code lock and Remote control (p.58).
⑩
Guide
The key operation is displayed.
⑦
Setting
Used to set the projector’s operating configurations (pp.43-57).
⑨
Network
See the owner’s manual of “Network Set-up and Operation”.