Sanyo PLC-WXE46, Owner'S Manual

Page: 44 / 68

Ceilin�
Rear
Ceilin�
When this function is set to “On”, the picture is top/bottom
and left/right reversed. This function is used to project the
image from a ceiling-mounted projector.
Rear
When this function is set to “On”, the picture is left/right
reversed. This function is used to project the image to a
rear projection screen.
44
Terminal
The COMPUTER IN 2/MONITOR OUT terminal on the back
of the projector is switchable for computer input or monitor
output (p.9). Select Computer 2 or Monitor Out with the
Point ◄► buttons.
Computer 2……computer input
Monitor Out……monitor out
Terminal function is not available when Computer 2 to the
input source is selected. Change the input source to the
others (Computer1 or Video) so that the Terminal function is
available (pp.25, 34–35).
Settin�
Input search
This function detects the input signal automatically. When
finding a signal, the search will stop. Use the Point ◄►
buttons to select one of the following.
Off …… Input search does not work.
On1 …… Input search works under the situation below.
• When the COMPUTER button or VIDEO button
on the remote control is pressed.
On2 …… Input search works under the situation below.
• When the projector is turned on with pressing the
POWER ON/STAND-BY button on the remote
control. (After the countdown)
• When the COMPUTER button or VIDEO button
on the remote control is pressed.
•When the current input signal is missed.


If the No show or Freeze function is active, cancel it
to activate the Input search. It is not available when
On-Screen menu is displayed.

Note:
• While Input search is set On1 or On2, the
status of Input and Lamp are displayed
every time the signal is switched.
• Only the input source selected at the last
time can be detected.
• If COMPUTER/VIDEO button on the
remote control is pressed during Input
search is in progress, Input search will
stop.
Screen aspect
This function is used to project the image to a 4:3 or 16:9
projection screen.
4:3 ..... Set to a 4:3 projection screen.
16:9 ..... Set to a 16:9 projection screen.
16:10 ....16:10 is the aspect of the LCD panel. The orignal
Screen Menu is available.

Note:
• When the 4:3 or 16:9 function is selected,
True, Full and D.Zoom+/- are not available
in the PC screen (pp.32-33).
• When the 4:3 or 16:9 function is selected,
Zoom, Natural wide and Wide are not
available in the AV screen (p.40).