Sanyo PLC-WXE46 Owner'S Manual Download Page 43

Page: 43 / 68

Logo PIN code lock Dialog Box

Enter a Logo PIN code

Select a number by pressing the Point ▲▼ buttons.

And then press the Point ► button to fix the number

and move the pointer. The number changes to "



". If

you fixed an incorrect number, move the pointer to the

number you want to correct by pressing the Point ◄

button, and then select the correct number by pressing

the Point ▲▼ buttons.

Repeat this step to complete entering a four-digit

number.

After entering the four-digit number, move the pointer to

"Set" by pressing the Point ► button. Press the SELECT

button so that you can change the following Logo PIN

code lock settings.

If you entered an incorrect PIN code, "Logo PIN code"

and the number (



) turns red. Enter a correct

Logo PIN code all over again.

Change the Logo PIN code

Logo PIN code can be changed to your desired four-digit

number. Select “Logo PIN code change” with the Point

▼ button and press the SELECT button. Set a new Logo

PIN code.

Be sure to note the new Logo PIN code and keep it on

hand. If you lost the number, you could no longer change

the Logo PIN code setting. For details on PIN code

setting, refer to relevant instructions of the PIN code lock

function on pages 47–48.

Logo PIN code lock

This function prevents an unauthorized person from

changing the screen logo.

Off…… the screen logo can be changed freely from

the Logo select menu (p.42).

On…… the screen logo cannot be changed without

the Logo PIN code.

If you want to change the Logo PIN code lock setting,

enter a Logo PIN code along the following steps. The

initial Logo PIN code is set “4321” at the factory.

Logo PIN code lock

CAUTION:

WHEN YOU HAVE CHANGED THE LOGO PIN CODE,

WRITE DOWN THE NEW PIN CODE IN COLUMN OF

THE LOGO PIN CODE NO. MEMO ON PAGE 67, AND

KEEP IT SECURELY. SHOULD THE LOGO PIN CODE

BE LOST OR FORGOTTEN, THE LOGO PIN CODE

SETTING CAN NO LONGER BE CHANGED.

After a correct Logo PIN code is entered, the

following dialog box appears.

Select On/Off by pressing the Point ◄► buttons

or change the Logo PIN code.

Select Logo PIN code change by pressing the

Point ▼ button.

Setting

Summary of Contents for PLC-WXE46





































































Search results

Summary of Contents for PLC-WXE46

Reviews:

Related manuals for PLC-WXE46

Brands by name

Popular brands

Sanyo PLC-WXE46, Owner'S Manual

Search results

Summary of Contents for PLC-WXE46

Reviews:

Related manuals for PLC-WXE46

Brands by name

Popular brands