Sanyo PLC-WL2501, Owner'S Manual

Page: 22 / 78

22
Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 68-69.
①
②
③
④
⑤
⑥
⑦
⑧
Main Menu Sub-Menu
⑨
⑩
③
Image select
For computer source, used to select an image mode from among Dynamic , Standard , Real , Blackboard(Green) ,
Colorboard and image 1 - 4 . (p.33)
For video or HDMI source, used to select an image mode among Dynamic , Standard , Cinema , Blackboard(Green) ,
Colorboard and Image 1- 4 . (p.40)
④ Image adjust
For computer source, used to adjust computer image [ Contrast , Brightness , Color temp. , White balance (Red/Green/
Blue), Sharpness and Gamma ]. (pp.34-35)
For video or HDMI source, used to adjust picture image [ Contrast , Brightness , Color , Tint , Color temp. , White
balance (Red/Green/Blue) , Sharpness , Gamma , Noise reduction and Progressive ]. (pp.41-42)
②
PC adjust
Select Auto PC adj. , Fine sync , Total dots , Horizontal , Vertical , Current mode , Clamp , Display area H and Display
area V to adjust the parameters to match with the PC input signal format. (pp.34-35)
⑤ Screen
For computer source, used to adjust size of the image [ Normal , True , Full , Custom and Digital zoom +/– ]. (pp.35-36)
For video or HDMI source, used to set size of image [ Normal , Full , Zoom , Wide, Natural wide and Custom ]. (p.43)
①
Input
Used to select an input source from Computer 1 , Computer 2 , HDMI , Video or S-video . (pp.27-28,37-38)
⑥
Sound
Used to adjust the volume or mute the sound. (p.24)
⑧
Information
Display the input source information: Input , H-sync freq. , V-sync freq. , Screen , Language , Lamp status , Lamp
counter
,
Power management
,
PIN code lock
and
Remote control.
(p.59)
⑩
Guide
The key operation is displayed.
⑦ Setting
Used to set the projector’s operating configurations. (pp.44-58)
⑨
Network
See owner’s manual of “Network Set-up and Operation”.
Basic Operation