Sanyo PLC-WL2500A Owner'S Manual Download

Page: 53 / 78

Setting

Closed caption

Closed caption is a printed version of the program sound or

other information displayed on the screen. If the input signal

contains Closed captions, you can turn on the feature and

switch the channels. Press the Point

▲▼

buttons to select

Off

CC1

CC2

CC3

CC4

If the Closed caption is not clear, you can change the text

from

Color

White

Closed caption



Note:

The Closed caption is available only under the situation
below.
• When the input signal is

NTSC

of composite and

S-video, and the system is set according to the signal
or set on

Auto

• The system must be set on

NTSC

Auto

in Video

System Selection. (p.39)

    • The item of Closed caption is displayed in gray while it
  is not available.
    •

Closed caption

is unavailable when On-Screen

Menu and P-timer are displayed.

Press the Point

▲▼

buttons to

select

Off

CC1

CC2

CC3

CC4

and then Press Select button.

Summary of Contents for PLC-WL2500A















































































Search results

Summary of Contents for PLC-WL2500A

Reviews:

Related manuals for PLC-WL2500A

Brands by name

Popular brands

Sanyo PLC-WL2500A, Owner'S Manual

Search results

Summary of Contents for PLC-WL2500A

Reviews:

Related manuals for PLC-WL2500A

Brands by name

Popular brands