The projector is detecting abnormal condition .
Appendix
87
Indicators
Projector Condition
POWER
green
LAMP/
SHUTTER
red/blue
LAMP
REPLACE
orange
WARNING
FILTER
orange
WARNING
TEMP.
red
If the Filter counter reaches a time set in the
timer setting, a Filter replacement icon (Fig.2) will
appear on the screen and the WARNING FILTER
indicator on the top panel will light up. Replace
the filter as soon as possible. If the filter is out
of scroll and the projector reaches a time set in
the timer setting, Fig. 3 will appear on the screen
and the WARNING FILTER indicator will light up.
Replace the filter cartridge as soon as possible.
If the filter is clogged and no scroll is left in the
filter cartridge, a Filter cartridge replacement
icon (Fig.4) will appear on the screen and the
WARNING FILTER indicator will light up. Replace
the filter cartridge as soon as possible.
Note:
Fig.2, Fig.3 and Fig.4 icon will not appear
when the Display function is set to
Off
(p.54)
or during “Freeze” (p.29).
The filter cartridge is not installed in the projector.
Check the filter compartment to see if the filter
cartridge is installed in the projector. When the
filter cartridge is installed and the indicators
continue to light and blink, read the column
below.
The projector detects an abnormal condition and
cannot be turned on. Unplug the AC power cord
and plug it again to turn on the projector. If the
projector is turned off again, unplug the AC power
cord and contact the dealer or the service center.
Do not leave the projector on. It may cause an
electric shock or a fire hazard.
The shutter is out of control.
The shutter is out of control. (The projector is in
the cooling mode.)
The shutter is out of control. (The projector is
in the stand-by mode.) In that case, contact the
service center immediately.
Fig .2
Filter replacement icon
Fig .4
Filter cartridge replacement icon
Fig .3
❖
❊
❊
❊
Summary of Contents for PLC-HP7000L
Page 98: ...KY2AL ...
