Sanyo PLC-HP7000L Owner'S Manual Download Page 5

Page: 5 / 98

All the safety and operating instructions should be

read before the product is operated.
Read all of the instructions mentioned here and retain

them for later use. Unplug this projector from AC

power supply before cleaning. Do not use liquid or

aerosol cleaners. Use a damp cloth for cleaning.
Follow all warnings and instructions marked on the

projector.
For added protection to the projector during a

lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the

wall outlet. This will prevent damage due to lightning

and power line surges.
Do not expose this unit to rain or operate it near

water for example, in a wet basement, near a

swimming pool, etc...
Do not use attachments not recommended by the

manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand,

or table. The projector may fall, causing serious

injury to a child or adult, and serious damage to the

projector. Use only with a cart or stand recommended

by the manufacturer, or sold with the projector. Wall

or shelf mounting should follow the manufacturer's

instructions, and should use a

mounting kit approved by the

manufacturers.
An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.
Slots and openings in the back and side of the

cabinet are provided for ventilation, to ensure reliable

operation of the equipment and to protect it from

overheating.
The openings should never be covered with cloth or

other materials, and the bottom opening should not

be blocked by placing the projector on a bed, sofa,

rug, or other similar surface. This projector should

never be placed near or over a radiator or heat

in installation such as a book case unless proper

ventilation is provided.
Never push objects of any kind into this projector

through cabinet slots as they may touch dangerous

voltage points or short out parts that could result in a

fire or electric shock. Never spill liquid of any kind on

the projector.
Do not install the projector near the ventilation duct of

air-conditioning equipment.

This projector should be operated only from the type

of power source indicated on the marking label. If you

are not sure of the type of power supplied, consult

your authorized dealer or local power company.
Do not overload wall outlets and extension cords as

this can result in fire or electric shock. Do not allow

anything to rest on the power cord. Do not locate

this projector where the cord may be damaged by

persons walking on it.
Do not attempt to service this projector yourself

as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.
Unplug this projector from wall outlet and refer

servicing to qualified service personnel under the

following conditions:

a. When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the projector.

c. If the projector has been exposed to rain or water.

d. If the projector does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the operating

instructions as improper adjustment of other

controls may result in damage and will often require

extensive work by a qualified technician to restore

the projector to normal operation.

e. If the projector has been dropped or the cabinet

has been damaged.

f. When the projector exhibits a distinct change in

performance-this indicates a need for service.

When replacement parts are required, be sure the

service technician has used replacement parts

specified by the manufacturer that have the same

characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or injury

to persons.
Upon completion of any service or repairs to this

projector, ask the service technician to perform

routine safety checks to determine that the projector

is in safe operating condition.

Safety Instructions

NOTE FOR CUSTOMERS IN THE US

Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN

MERCURY AND MUST BE RECYCLED OR

DISPOSED OF ACCORDING TO LOCAL, STATE OR

FEDERAL LAWS.

Summary of Contents for PLC-HP7000L



































































































Search results

Summary of Contents for PLC-HP7000L

Reviews:

Related manuals for PLC-HP7000L

Brands by name

Popular brands

Sanyo PLC-HP7000L, Owner'S Manual

Search results

Summary of Contents for PLC-HP7000L

Reviews:

Related manuals for PLC-HP7000L

Brands by name

Popular brands