Sanyo PLC-EF60A, Service Manual

Page: 48 / 184

- 48 -
Electrical Adjustments
Group No. Item Function Range Initial Value
0 Thermal Monitor Read only
0 LM76(Temp) Monitor Thermal sensor (Intake duct) [iic error =999] - -
1 LM76(Temp) Monitor Thermal sensor (Inside) [iic error =999] - -
2 Thermistor Monitor Thermistor (Panel) [iic error =999] - -
1 Atmosphere Monitor Read only
0 MPXA4114A(Pressure) Monitor Atmosphere sensor - -
1 MPXA4114A(Pressure) Monitor Atmosphere sensor [unit: mmHg] - -
2 MPXA4114A(Pressure) Monitor Atmosphere sensor [unit:hpa] - -
2 Airflow sensor Monitor Read only
0 Airflow Monitor Airflow sensor - -
3 Acceleration sensor Monitor Read only
0 MAS1390 (Acceleration) Monitor Acceleration sensor - -
4 Lens position sensor Read only
0 Lensshift T/B Position Monitor - -
1 Lensshift L/R Position Monitor - -
2 Zoom Position Monitor - -
3 Focus Position Monitor - -
5 Fan voltage sensor, Read only
FAN A Monitor
Voltage = value /100 - -
FAN B Monitor Voltage = value /100 - -
FAN C Monitor Voltage = value /100 - -
FAN D1 Monitor Voltage = value /100 - -
FAN D2 Monitor Voltage = value /100 - -
FAN E Monitor Voltage = value /100 - -
10 RS232C Setting * Do not change setting when using LAN card
0 Baudrate RS232C Baudrate (0:9600 / 1:19200) 0 / 1 1
1 RTS/CTS Flow Control RS232C RTS/CTS Flow Control(0:Disable / 1:Enable) 0 / 1 0
2 CTS Timeout Second RS232C CTS Timeout value 0 ~ 255 0
3 Serial Address Unique address for the projector when using RS232C daisy chain use 0 ~ 999 1
11 Lan Card Setting
0 LAN Card Switch LAN (0: Disable / 1: Enable) 0 / 1 1
20 Logo prohibition
0 Logo prohibition Logo prohibition(0: Menu / 1: Forced) 0 / 1 0
30 Color Shading/Gamma
0 Color Shading Correction On/Off Color Shading Correction (0:Off / 1:On) 0 / 1 1
1 Gamma Correction On/Off Gamma Correction (0:Off / 1:On) 0 / 1 1
40 Dimmer Control
0 Dimmer Level 0:250 ~ 15:300W Effect only 300W 0 ~ 15 15
1 DIMMER AREA NORMAL HS Acquisition range of bright level data for dimmer HS(Normal Screen) 0~2047 43
2 DIMMER AREA NORMAL HR Acquisition range of bright level data for dimmer HR(Normal Screen) 0~2047 1067
3 DIMMER AREA NORMAL VS Acquisition range of bright level data for dimmer VS(Normal Screen) 0~2047 4
4 DIMMER AREA NORMAL VR Acquisition range of bright level data for dimmer VR(Normal Screen) 0~2047 772
5 DIMMER AREA WIDE HS Acquisition range of bright level data for dimmer HS(Wide Screen) 0~2047 43
6 DIMMER AREA WIDE HR Acquisition range of bright level data for dimmer HR(Wide Screen) 0~2047 1067
7 DIMMER AREA WIDE VS Acquisition range of bright level data for dimmer VS(Wide Screen) 0~2047 100
8 DIMMER AREA WIDE VR Acquisition range of bright level data for dimmer VR(Wide Screen) 0~2047 676
9 DIMMER CTRL LEVEL1 Bright level1 data: Bright level1 when less than the value 0~32767 75
10 DIMMER CTRL LEVEL2 Bright level2 data: Bright level2 when less than the value 0~32767 150
11 DIMMER CTRL LEVEL3 Bright level3 data: Bright level3 when less than the value 0~32767 225
12 DIMMER CTRL LEVEL4 Bright level4 data: Bright level4 when less than the value 0~32767 300
13 DIMMER CTRL LEVEL5 Bright level5 data: Bright level5 when less than the value 0~32767 375
14 DIMMER CTRL LEVEL6 Bright level6 data: Bright level6 when less than the value 0~32767 450
15 DIMMER CTRL LEVEL7 Bright level7 data: Bright level7 when less than the value 0~32767 525
16 DIMMER CTRL LEVEL8 Bright level8 data: Bright level8 when less than the value 0~32767 600
17 DIMMER CTRL LEVEL9 Bright level9 data: Bright level9 when less than the value 0~32767 675
These initial values are the reference data written from the
CPU ROM to memory IC when replaced new memory IC. The
adjustment items indicated with “
✻
” are required to readjust
following to the “Electrical adjustments”. Other items should be
used with the initial data value.
4. Service Adjustment Data Table