Sanyo PJ-Net, Owner'S Manual

Page: 38 / 114

38
Chapter 4 Controlling the Projector
✐
The projector is not turned on for about 90 seconds after switching into the standby mode.
After the power status indicator on the control page changes from “On Cooling down” to
“OFF”, then try to turn on the projector with
On
button.
✐
The web browser checks and updates the projector's condition every 20 seconds automatically.
Power on/off the projector
Click Power & Status on the main menu. The control page will be displayed.
By clicking On or Standby button on the page, the power of the projector
can be controlled. When you click Standby button, another confirmation popup win-
dow* 1 will appear, and then click OK button if it is set to standby.
[Note]
*1 This popup window is realized by using the JavaScript
function of web browser. If the preference of the browser
is set not to use JavaScript, the popup window will not
appear on the screen.
There are various kind of ways to change this preference
depending on the web browser's version and application.
Please refer to item “Appendix: Web browser
setting/Active Script (JavaScript enable)” (
☞
p.96).
(JavaScript On)
(JavaScript Off)
This chapter describes controlling the projector via a network using this product.
Display the main menu following to the login procedure described on page 26.