Sanyo PDG-DHT8000L - 8000 Lumens, Service Manual

Page: 38 / 242

-38-
to enter the service mode
To enter the “Service Mode”, press and hold the
MeNu
and
SeLect button
for more than 3 seconds, or press
and hold the
MeNu
button for more than 20 seconds.. The service menu appears on the screen as follows.
to adjust service data
Select the adjustment Group No. by pressing the
MeNu button
(increase) or
SeLect button
(decrease), and
select the adjustment Item No. by pressing the pointer
U
or
V button
, and change the Data value by pressing the
W
or
X button
. Refer to the “Service Adjustment Data Table” for further description of adjustment Group No., Item
No. and Data value.
to exit the service mode
To exit the service mode, press the
oN/StANd-BY button
.
Service Adjustment Menu Operation
Adjustments
Service Mode
Input
Input 1
Image Standard
Group No. Data
0 0 32
Ver. 1.00
Data value
Item No.
Group No.
Firmware
Version No.