Sanyo NV-E7000 - Portable GPS And Mobile DVD Entertainment System Installation And Operation Manual Download Page 73

Page: 73 / 110

136

RETRIEVING REGISTERED POINT MAPS

Pressing down on the Joystick (

)

will display the continuation. Press
the Joystick (

) or the

buttons to go to the next/previous

page.

Select and

press

the

button.

Display Map

Select a geographic point and
press the

button.

The registered point information
screen is displayed.

Press the

button.

Select from
the drop-down

menu

and press the

button.

Edit Saved Location

RETRIEVING REGISTERED POINT

MAPS

Edit Saved Location

135

Inputting.

Select

and press the

button.

You can also delete characters by
opening the remote control flip-
top and pressing the

button.

Delete

When inputting is complete,
select

on the item

board and press the

button. The inputted content
is confirmed.

To change/register another item

(Name/TEL/Mark), repeat steps

to .

Done

To complete setting…

press the

button to

return the screen to the present
location map.

Press the

button to

return to the menu screen.

Clearing the inputted (A) character.

Example

Inputting “A”

→

“B” in the memo.

Inputting “B”.

EDITING/VIEWING REGISTERED POINTS (2)

Summary of Contents for NV-E7000 - Portable GPS And Mobile DVD Entertainment System















































































































Search results

Summary of Contents for NV-E7000 - Portable GPS And Mobile DVD Entertainment System

Reviews:

Related manuals for NV-E7000 - Portable GPS And Mobile DVD Entertainment System

Brands by name

Popular brands

Sanyo NV-E7000 - Portable GPS And Mobile DVD Entertainment System, Installation And Operation Manual

Search results

Summary of Contents for NV-E7000 - Portable GPS And Mobile DVD Entertainment System

Reviews:

Related manuals for NV-E7000 - Portable GPS And Mobile DVD Entertainment System

Brands by name

Popular brands