5
PRECAUTIONS FOR SAFE OPERATION
Fix the shelves securely.
Incomplete installation may cause injury or damage.
When removing the plug from the power supply outlet, grip the power supply plug,
not the cord.
Pulling the cord may result in electric shock or fire by short circuit.
Never damage or break the power supply plug or cord.
Do not use the supply plug if its cord
is loose.
This may cause fire or electric shock.
Do not touch any electrical parts
such as the power supply plug or any switches with a wet hand.
This may cause electric shock.
Do not put a container with water or heavy articles on the unit
. Injury may be caused if the
articles fall. Current leakage or electric shock may result from the introduction of spilled water into
electrical components.
Do not climb onto the unit.
This may cause damage to the unit and cause it to tip over.
Hold the handle when closing the door.
This will reduce the likelihood of a trapped finger.
Never place your hand on the glass or use excessive force on the glass.
Intentional force may
break the glass resulting in injury from the broken glass.
Do not touch the condenser directly
when the filter is removed for cleaning.
This may cause injury
due to
hot surface. (MPR-1013, MPR-1013R only)
Disconnect the power supply plug
before moving the unit. Take care not to damage the power
cord. A damaged cord may cause electric shock or fire.
Dispose of any water in the evaporation tray completely before moving the unit.
Spilled or
splashed water may cause current leakage or electric shock.
Be careful not to tip the unit over
during movement to prevent damage or injury.
Disconnect the power plug
when the unit is not used for long periods.
Do not put the packing plastic bag used in the packaging within reach of children
as suffocation
may result
CAUTION
