Sanyo LCD-46XR10DKH, Service Manual

Page: 14 / 41

12
Fig. 4 Burning file
5) Select menu “ Auto ”, then select items “ All chip ”, “ program ” and other switches as Fig. 5
Fig. 5 Switches
6) Press key “ Run ” as Fig. 4 to begin burning software, there are two steps for the process: Erase
and Program , normal burning processes are as follows:
the first course “ Erasing… ” will be lasting for a moment, otherwise skipping over means
unsuccessful erasing; please confirm process
（
2
）
and then burn software again;
the following course “ Programming… ” will be done until a prompt “ Pass ” is displayed.
7) A prompt “ Pass ” will be displayed beside the key “ Run ” for successful burning as Fig. 6