Sanyo LCD-46XR10DKH, Service Manual

Page: 11 / 41

9
5 720(1440)×480 15.734/15.75 59.94/60 27/27.027
720(1440)×480i@59.94/60
Hz,4:3/16:9
Mode 1 59.826/59.886
6 720(1440)×240 15.734/15.75
mode 2 60.054/60.115
27/27.027
720(1440)×240p@59.94/60
Hz,4:3/16:9
7 (2880)×480 15.734/15.75 59.94/60 54/54.054 (2880)×480i@59.94/60 Hz,4:3/16:9
mode 1 59.826/59.886
8 (2880)×240 15.734/15.75
mode 2 60.054/60.115
54/54.054 (2880)×240p@59.94/60 Hz,4:3/16:9
9 1440×480 31.469/31.5 59.94/60 54/54.054 1440×480p@59.94/60 Hz,4:3/16:9
10 1920×1080 67.432/67.5 59.94/60 148.352/148.5 1920×1080p@59.94/60 Hz
11 720×576 31.25 50 27 720×576p@50 Hz,4:3/16:9
12 1280×720 37.5 50 74.25 1280×720p@50 Hz
13 1920×1080 28.125 50 74.25 1920×1080i@50 Hz
14 720(1440)×576 15.625 50 27 720(1440)×576i@50 Hz,4:3/16:9
Mode1 49.761
Mode2 49.92 15 720(1440) ×288 15.625
Mode3 50.08
27 720(1440)×288p@50 Hz,4:3/16:9
16 (2880) ×576 15.625 50 54 (2880)×576i@50 Hz,4:3/16:9
Mode1 49.761
Mode2 49.92 17 (2880) ×288 15.625
Mode3 50.08
54 (2880)×288p@50 Hz,4:3/16:9
18 1440×576 31.25 50 54 1440×576p@50 Hz,4:3/16:9
19 1920×1080 56.25 50 148.5 1920×1080p@50 Hz
20 1920×1080 26.973/27 23.97/24 74.176/74.25 1920×1080p@23.97/24 Hz
21 1920×1080 28.125 25 74.25 1920×1080p@25 Hz
22 1920×1080 33.716/33.75 29.97/30 74.176/74.25 1920×1080p@29.97/30 Hz
4.6 USB port
Connect the USB device with picture, sound and video documents and check if the picture, sound
and functions are normal.
4.7 Other functions check
a) Check if the functions are normal -timing turn-on/off
、
sleeping turn-off
、
picture/sound mode
、
OSD 、 stereo and digital audio interface, etc.;
b) Check if Audio Only digital programs are normal;
c) Check if function of logic channel number ( LCN ) is normal;
5. User menu setup before leaving factory
Enter into page “ LOCK ” of user menu and iput the initial password “0000 “, select submenu
“ Restore Factory Default ” then press “ OK “ to preset items before leaving factory as below:
a) Clear out all programs information;
b) Clear out information of block program and favorite channels;
c) Default setup of user analog data;
d) Set Menu Language as
Chinese ;
e) Set Power on MODE as Standby .