27
TV SETTING
SETTING COLOUR SYSTEM
In case of abnormal sound, you may try to adjust the sound system.
Press ◄ or ► button to select
AUTO
,
PAL
or
SECAM
until
the proper colour effect is reached.
2
1
Navigate to ATV Manual Tuning submenu, press ▲ or ▼
button to highlight
System-C
item.
Press RED button to save.
3
SETTING SOUND SYSTEM
Normally it is unnecessary to set colour system. However, if abnormal colour occurs, you may try to adjust
the colour system.
Press ◄ or ► button to select
DK
,
I
or
BG
until the proper
sound effect is reached.
2
1
Navigate to ATV Manual Tuning submenu, press ▲ or ▼
button to highlight
System-S
item.
Press RED button to save.
3
Fine-Tune is not necessary under normal conditions. However, in area of inferior broadcast conditions
where adjustment is necessary for a better picture and sound effect, use Fine-Tune.
FINE TUNING
Press ◄ or ► button to fine tune until the best possible
picture and sound are obtained.
2
1
Navigate to ATV Manual Tuning submenu, press ▲ or ▼
button to highlight
Fine-Tune
item.
Press RED button to save.
3
ATV Manual Tuning
Skip Yes
Used to remove unwanted channels from the channel scanning memory.
SKIP
Press ▲ or ▼
button to select
Skip
item. Press ◄ or ►
button to select
Yes
.
2
1
Navigate to ATV Manual Tuning submenu, press ▲ or ▼
button to highlight
Current CH
item. Press ◄ or ► button
to select a channel positon in which you want to skip.
Press RED button to save. The Channel set as SKIP
will not appear when pressing CHANNEL UP (▲) or
CHANNEL DOWN (▼) button.
3
LCD-K40TD_(SEI).indd 27
2/18/2010 1:06:14 PM
