background image

English   

- 9 -

Note: These three methods of connection perform the 
same function but in different levels of quality. It is not 
necessary to connect by all three methods.

Using Side AV Connectors

You can connect a range of optional equipment 
to your LCD TV. Possible connections are shown 
below. Note that cables shown in the illustration are 
not supplied.

• For connecting a camcorder, connect to the VIDEO 

IN socket and the AUDIO SOCKETS. Do not connect 
the camcoder to VIDEO IN socket at the same time 
since it can cause noise in the picture. For selecting 
the related source, see the section “Input selection” 
in the following parts.

• To listen the TV sound from headphones, connect 

to the HEADPHONE jack of theTV.

Camcorder

Headphone

Using Other Connectors

You can connect a range of optional equipment 
to your LCD TV. Possible connections are shown 
below. Note that cables shown in the illustration are 
not supplied.

• To connect external speakers, use an audio cable. 

Do not reverse the AUDIO LEFT and AUDIO RIGHT 
jacks. Turn on the LCD TV and external speaker set 
after all connections are made. Refer to your speaker 
set’s manual for further queries.

• For connecting a to a device that has SPDIF support, 

use an appropriate SPDIF cable to enable sound 

connection. You should also set SPDIF Out option 
in the Sound menu as On.

External  Speakers

A  device  that 

supports 

SPDIF  signal.

Connecting Other Equipment via 
Scart

Most devices support SCART connection. You can 
connect a; DVD recorder, a VCR or a decoder to your 
LCD TV by using the SCART socket. Note that cables 
shown in the illustration are not supplied. 

Power off both the TV and the devices before making 
any connections.

For more information, refer to your device’s own 
instruction book.

Inserting Batteries in the Remote 
Control Handset

• Remove the battery cover located on the back of 

the handset by gently pulling backwards from the 
indicated part.

• Insert two 

AAA/R3

 or equivalent type batteries 

inside. Place the batteries in the right directions and 
replace the battery cover.

01_MB37_[GB]_(01_TV)_22890W_1900UK_IDTV_BRONZE13_10065805_5017xxxx.indd   9

01_MB37_[GB]_(01_TV)_22890W_1900UK_IDTV_BRONZE13_10065805_5017xxxx.indd   9

16.08.2010   10:09:38

16.08.2010   10:09:38

Summary of Contents for LCD-22VT10DVD












































Reviews: