108
Adjusting the screen contrast
Use this function to adjust the contrast of
the screen. You can choose from 10 levels
for the adjustment.
1
Turn on the power, and press
the MENU/PLAY LIST button.
2
Press the VOL (+/–) button to
select “COMMON MENU”, and
then press the
/OK button.
3
Press the VOL (+/–) button to
select the “CONTRAST” setting,
and then press the
/OK
button.
4
Press the
/
button to
adjust the contrast, and then
press the
/OK button.
【CONTRAST】
CONTRAST 6
L
H
MIC
ST
A
SD
Contrast adjustment: 1 (L) to 10 (H)
Press the MENU/PLAY LIST button to
exit the menu.
Using the security function (applied
to the internal memory only)
You can set up a passcode on the unit to
apply playback lock to files. (Recording and
erasing files are not affected by the security
function.)
• Once you turn on the security function,
when the unit is connected to your PC,
folders protected by the security function
do not appear on the PC.
• If you forget the passcode, you cannot
play or use files. For this reason, be sure
to write down the passcode and keep it
in a safe place. SANYO cannot help you
decipher or clear the passcode.
Theft, loss, or fraud may cause
leakage of personal information
on the unit to third parties. SANYO
is not responsible for any damage
due to leakage of personal
information to third parties. Also,
SANYO takes no responsibility for
damages caused by the use/failure
of the unit.
Setting a passcode
1
Turn on the power, and press
the MENU/PLAY LIST button.