Sanyo HEC-DR7700BR - Zero Gravity Massage Chair Instruction Manual Download Page 2

2

IMPORTANT SAFETY INSTRUCTIONS

1

All of the following information is important. 

Be sure to follow the instructions carefully.

When  using  an  electrical  appliance,  basic  precautions  should  always  be  followed,  including  the 

following:

Read all instructions before using this appliance.

Always unplug this appliance from the electrical outlet immediately after using and before cleaning.

Improper  connection  of  the  equipment-grounding  conductor  can  result  in  a  risk  of  electric  shock. 

Check  with  a  qualified  electrician  or  serviceman  if  you  are  in  doubt  as  to  whether  the  product  is 

properly grounded. Do not modify the plug provided with the product – if it will not fit outlet, have a 

proper outlet installed by a qualified electrician.

Do  not  wind  the  power  cord,  remote  control  cord  or  sensor  controller  cord  around  the  main  unit, 

remote control, sensor controller, or remote control stand. 

Moreover, be careful not to operate the back rest with the cord hooked on some obstruction.

Otherwise, unreasonable force may be applied to the cord, possibly resulting in fire or electric shock.

Do not allow any children to use the massager, play on or around it. Also, while in use, keep children 

away from the massager. Lock the plug with the paddle lock provided when not in use and store key 

out of reach of children.

Otherwise, an injury may occur.

Be sure to check that there is no-one (children in particular), or any pets under the foot rest prior to 

lowering the foot rest. In addition, do not leave the foot rest in the raised position.

Otherwise, an injury may occur.

Do not attempt to stand on the arm rest, foot rest, back rest, or remote control stand.

Otherwise, the user may fall over, resulting in injury.

Do  not  use  the  massager  on  the  head,  the  chest,  the  abdomen  or  on  bones  (elbow,  knee,  etc).  In 

addition, do not put your hand, foot or arm between the massaging rollers. 

Otherwise, the user may feel sick or an injury may occur. (When massaging the nape of the neck, put a soft 

towel on the neck in order to avoid strong stimulation.)

Be careful not to use the massager when the cord or the power plug is damaged or the plug socket is 

loose.

Otherwise, electric shock, short circuit or fire may occur.

The following persons are requested to consult a doctor prior to use. 

Otherwise, the user may feel sick or an injury may occur.

Those who are undergoing medical treatment and particularly those who complain of indisposition 

Those who have malignant tumors

Those who suffer from heart trouble

Those who are in menstrual period or pregnant

Those who require complete rest

Those whose spine is abnormal or bent

Those  who  desire  to  use  the  massager  on  a  part  of  the  body  that  was  previously  diseased  or 

receiving medical treatment

Those who are feverish (100

 or over)

Those who have weak bones (osteoporosis etc.)

Those who use a medical electronic device implanted into the body (e.g. a pacemaker)

Those who have a serious blood circulation disorder in the legs

Never attempt to dismantle the massager. Do not allow any personnel other than a qualified repair 

technician to dismantle or repair the massager.

Otherwise, fire, electric shock or injury may occur. Ask the sales agent if repairs are required.

Do not attempt to damage, break, modify, bend forcibly, pull, twist or bundle the cord.

In addition, do not put heavy objects on the cord or jam the cord between objects.

Otherwise the cord may break, resulting in fire or electric shock.

Do not use the massager at any current other than the designated voltage.

Otherwise, fire or electric shock may occur.

Be sure to disconnect the power plug from the outlet prior to maintenance. Also, do not attempt to 

plug/unplug the power plug with wet hands.

Otherwise, injury or electric shock may occur.

DANGER   

To reduce the risk of electric shock:

Handling the cord on this product or cords associated with accessories sold with this product, will 

expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or 

other reproductive harm. 

Wash hands after handling.

An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, 

and before putting on or taking off parts.

Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or 

injury to persons.

Close  supervision  is  necessary  when  this  appliance  is  used  by,  on,  or  near  children,  invalids,  or 

disabled persons.

Use this appliance only for its intended use as described in this manual. Do not use attachments not 

recommended by the manufacturer.

Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has 

been  dropped  or  damaged,  or  dropped  into  water.  Return  the  appliance  to  a  service  center  for 

examination and repair.

Do not carry this appliance by supply cord or use cord as a handle.

Keep the cord away form heated surfaces.

Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, 

and the like.

Never drop or insert any object into any opening.

Do not use outdoors.

Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

To disconnect, turn all controls to the off position, then remove the plug from the outlet.

This product is for Household Use Only.

Polarization Instructions

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the 

other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, 

reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not 

change the plug in any way.

Be sure to check that there is no-one (children in particular), or any pets around the massager prior to 

adjusting the back rest. 

Otherwise, an injury may occur. 

Be careful not to put your hand or foot into the space between the back rest and arm rest or into the 

space at the underside of the back rest or between the foot rest and the seat or into the space under 

the foot rest. 

Otherwise, an injury may occur.

WARNING   

To reduce the risk of burns, fire, electric shock, or injury to persons:

 

PLUG

PLUG

KEY

PADDLE LOCK

COVER

Summary of Contents for HEC-DR7700BR - Zero Gravity Massage Chair

















Reviews: