background image

4

3

Be careful not to spill water over the remote control, sensor controller, seat, or foot rest.

Otherwise, electric shock, short circuit or fire may occur.

Do not suddenly release your hand, while raising the foot rest with the hand. 

Otherwise, an injury may occur.

Prior to use, be sure to raise the back pad in order to check that the cover cloth or the cloth of other 

parts is not torn. If a tear is found, however small, stop using the massager immediately, unplug the 

power source, and obtain service.

If the massager is used with torn cloth, it may result in injury or electric shock.

Use  only  under  careful  medical  supervision  if  you  have  or  there  is  a  possibility  that  you  have  a 

medical condition that may possibly, in any way, be affected by massager.

If discomfort or pain is felt during use, stop using the massager and consult a doctor immediately. In 

addition, when the massage force is felt strongly, stop using it earlier than planned. 

Otherwise, if the user continues using in such a way, an unexpected accident may occur.

For safety, check the position of the massaging rollers before leaning slowly back on the massager. 

Do not twist the body, but lean straight back on the massager, so that the massaging rollers are in 

position on either side of the spine.

Otherwise, leaning abruptly on the massager may injure the spine or result in some other injury.

After use, be sure to set the POWER switch to the [OFF] position, and the LOCK switch to the [LOCK] 

position.

Otherwise, it may result in accident or injury due to a child's mischief.

Do  not  use  the  massager  on  top  of  a  heated  carpet  or  other  heater,  or  near  a  stove  or  other  heat 

sources.  

Otherwise, it may result in fire.

Do not hang from the back pad or head cover.

Do not attempt to hang from the back pad or head cover, or pull the back pad or head cover forcibly.

Otherwise, the back pad or head cover may come off, possibly resulting in injury.

Aim to use the massager for up to 20 minutes each time. Limit the use of the massager on one point 

to 5 minutes or less.

Otherwise, the continuous use of the massager on one point for an extended period may result in adverse 
effects or injury.

Be careful not to fall asleep during massage.

Otherwise, an injury may occur.

Place the massager main unit on a level floor surface.

Otherwise, if it is placed at an unstable place, the main unit may fall over, possibly resulting in injury.

Do not use the massager in the bathroom, or places with high humidity.

Otherwise, electric shock may occur.

Do  not  place  anything  other  than  the  remote  control  and  the  sensor  controller  respectively  on  the 

remote control stand. 

Otherwise, the stand may break, resulting in injury.

Do not use the massager on bare skin.

Otherwise, an injury may occur.
 

Do not use for any other purposes other than as a massager or as a chair.

Otherwise, an accident or injury may occur.

Avoid  use  by  those  who  are  unable  to  clearly  indicate  their  intentions,  as  well  as  by  physically 

disabled people.

Otherwise, an injury may occur.

Do not attempt to disconnect the power plug by pulling the cord, but always by holding the power 

plug and pulling it out. Also, clean the dust off the power plug periodically. 

Otherwise, electric shock, short circuit or fire may occur.

Switch the power [OFF] instantly if there is a power failure, and also pull the power plug out from the 

outlet.

Otherwise, it may become dangerous when the power is restored.

Do not move the massager with a person on it.

Otherwise, the massager may fall over, resulting in injury.

At first, do not attempt to recline the seat deeply, lean on the back rest forcibly or massage without 

the back pad (until you have become accustomed to massaging).

Otherwise, if the massaging force is too strong at the outset, it may result in adverse effects or injury. 

Do not use the massager with other medical instruments (e.g. a low frequency medical instrument).

Otherwise, the user may feel sick or, it may cause other health problems.

If the massager becomes inoperative, disconnect the power plug immediately to prevent accidents, 

and ask the sales agent for inspection/repair information.

Otherwise, it may result in fire due to electric shock, current leakage, short circuit, etc.

When the equipment will not be used for an extended period, be sure to disconnect the power plug 

from the outlet.

Otherwise, it may result in electric shock, current leakage or fire due to damaged insulation.

The maximum permissible weight of the massager is 120 kilograms.

Otherwise, an accident may happen or damage to the machine may result.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

 

Summary of Contents for HEC-DR7700

















Reviews: