-19-
ERROR SIGNS
CD Player
If a problem should occur while operating the built-in CD player, one of the following error signs
may be displayed:
CD Changer
If a problem should occur while operating the connected CD changer, one of the following error signs may
be displayed.
Symptom
Cause
Solution
E01
Abnormal CD mechanism function.
Press the eject button.
Turn the power off and then on
again. If it is not corrected, contact
the place of purchase.
E07
The disc was inserted incorrectly.
Insert the disc properly.
The disc is dirty.
Clean the disc.
The disc is defective.
Use another disc.
There is condensation on the opti-
cal lens.
Leave the disc player off for an hour
or so, then try again.
E99
Internal connection check error.
Turn the power off and then on
again.
If it is not corrected, contact the
place of purchase.
Symptom
Cause
Solution
E01
Abnormal mechanism function
Contact the place of purchase.
E07
The disc was inserted incorrectly.
Insert the disc properly.
The disc is dirty.
Clean the disc.
The disc is defective.
Use another disc.
There is condensation on the
optical lens.
Leave the disc player off for an hour
or so, then try again.
Refer to the instructions supplied
with the CD changer.
no Cd
The magazine is not fully inserted
into the changer.
No discs in the magazine.
Completely insert the magazine into
the changer until it clicks into place.
Load discs into the magazine.
