– 19 –
EN
C
Audio settings
Choose the appropriate audio settings for your device. It only affects the sound during DVD playback. Follow steps 1 and 2 on
page 16.
3
Select the desired item.
System
Language
Audio
Video
Preference
8
Night Mode
HDMI Audio
0
<Audio menu>
4
HDMI Audio: (Default: PCM)
Set to “Bitstream” when the unit is connected to a Dolby
Digital decoder.
– Bitstream: outputs a Dolby Digital signals.
– PCM: convert the Dolby Digital into PCM (2 channel).
5
To exit the menu
e
Night Mode
HDMI Audio
PCM
Bitstream
Select the desired
setting.
Night Mode (Default: 0)
Adjusts for clarity even when the volume is Low, by
compressing the range of the lowest sound level and the
highest sound level.
ge
nce
8
Night Mode
HDMI Audio
0
Note(s):
Audio Out:
– Bitstream:
Connecting to a Dolby Digital decoder for Dolby Digital audio output.
The multi-channel audio signals are output from HDMI OUT jack with Bitstream or LPCM.
– PCM:
Connecting to another device (an MD deck or DAT deck etc.) without a Dolby Digital decoder.
Convert the Dolby Digital into LPCM (2 channel).
• This unit does not support DTS audio. This is not a malfunction.
You need to set this unit to “Bitstream” in the “HDMI Audio” Menu and also need to connect to a TV or amplifier that
supports DTS, then the audio will be output as DTS.
It is only available when connected via a HDMI cable.
• “HDMI Audio” cannot be configured when voice guide is set to on, as it is fixed to PCM. In order to configuring the
setting, set voice guide to off.
