Sanyo DSR-5016, Quick Operation Manual

Page: 9 / 20

DSR-5016 series Quick Operation Guide
• Alarm log search
Search functions
Alarm Log OSD the month
Select the week, day and the hour
Select the ALARM SEARCH or ALARM THUMBNAIL SEARCH
DD-MM-YY 1 5 10 15 20 25 30
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
SEARCH:ALARM
< ALARM LOG SEARCH > TERM : MONTH
Time
axis
TERM
SEARCH
Use the following procedure to perform an alarm search or alarm
thumbnail search by defining the period (month, week, day or time)
of the alarm recorded video.
Press the [SEARCH] button while the digital video recorder is
recording or stopped.
Select “ALARM LOG SEARCH” .
Select the value for “TERM” . (Month / Week / Day / Hour)
Select the date, time or minute.
Selected day (hour or minute) is indicated with a yellow frame.
Select "ALARM" or "THUMBNAIL" .
Press the [FUNC.] button to search for normal record-
ing . A blue mark is displayed at the top left of the screen,
and normally recorded parts are displayed in blue. (The
search for normal recording may take some time.)
Turning the jog dial
will move the cursor.
To move to the preceding / following
month, press the
[ALARM] buttons.
8
The alarm log search will start
from the current month.
Finally, select the time of
images that need to be re-
viewed
Within the OSD screen, use the jog dial to display sub-menus and move the cursor. Turn the shuttle ring
clockwise to select an entry. Turning it counterclockwise will bring up the previous screen.