Sanyo DSR-5016, Quick Operation Manual

Page: 14 / 20

DSR-5016 series Quick Operation Guide
Within the OSD screen, use the jog dial to display sub-menus and move the cursor. Turn the shuttle ring
clockwise to select an entry. Turning it counterclockwise will bring up the previous screen.
•The cursor is on the top left position.
•Turn the shuttle ring. The symbol “ ” appears on the top right of the screen, which
means you can move the cursor to left or right.
To move the cursor up or down, press the
[FUNC.] button and the symbol “ ” will
change to “ ”.
•Before resizing the ROI area, it is necessary to determine the direction of setting an
area (starting at the top left corner and ending at the bottom right corner, or vise versa).
Use the shuttle ring to switch the direction.
ROI
• Setting the ROI area
CH01 T-1 LEVEL: OFF TIME LAG: OFF
Select "T-1" at the bottom of ROI setting screen.
Set either "LEVEL" or "TIME LAG" .
After “AREA / SENSITIVITY SET” ,
turn the shuttle ring counterclockwise.
Press the [EXIT/OSD] button.
The setting is completed and the display
returns to the normal screen
.
Select the time period to be applied to the ROI.
T-1
T-2
T-3
T-4
“T-1” through “T-4” are the times of TIME PERIOD A or
TIME PERIOD B set on the <TIME PERIOD SET> screen.
Time period T-1
Time period T-2
Time period T-3
Time period T-4
Setting Description
OFF
1 - 10
Setting Description
Response sensitivity is enabled. Lower
numbers correspond to higher levels of
sensitivity.
Response sensitivity is disabled.
OFF
1S - 10S
Setting Description
No operation after the response-stop
Time lag after the response-stop (seconds)
CH-1 T-1 LEVEL : OFF TIME LAG: OFF
1
2
Move the cursor to change
the position of the ROI area.
(For further details, refer Instruction Manual p.139.)
13
Press the [MENU] button.
Select “8. ADVANCED MENU SET”
Select “1. ROI SET“
Select “AREA / SENSITIVITY SET”
Once the ROI Area 1 is set, ROI Area 2 will be ready for setting.
Follow the same procedure to set ROI Area 2 .
Turning the jog dial will move
the cursor toward upper-left or
lower-right direction.
CH01 T-1 LEVEL: OFF TIME LAG: OFF