About Configuration via Menus
17
English
■
To copy the settings you configured via
menus:
When you are using more than one recorders, you can copy the
settings you configured via menus on the main recorder and load the
settings onto sub recorders so that you can easily and quickly
configure them.
Insert a CompactFlash card into the
CompactFlash card slot of the main recorder.
Press the MENU button to open the MAIN MENU
screen, and choose “7. COPY MENU SETTINGS”.
q
Shows the firmware version number.
w
Allows you to save the settings onto the card.
e
Allows you to load the settings from the card.
r
Allows you to copy the recording area settings as well.
¡
If you set this option to YES and load the settings from the card,
existing video data are erased (the hard disk is initialized).
(Available when loading the settings from a CompactFlash card.)
Choose “SAVE MENUS TO CF” and turn the S-dial
clockwise.
A WARNING screen appears. Choose “YES”, and
then turn the S-dial clockwise.
a
The settings will be saved onto the card.
Remove the card from the main recorder, and
insert it into the CompactFlash card slot of the
destination recorder.
Press the MENU button to open the MAIN MENU
screen, and choose “7. COPY MENU SETTINGS”.
Choose “LOAD MENUS FROM CF” and turn the
S-dial clockwise.
A WARNING screen appears. Choose “YES”, and
then turn the S-dial clockwise.
a
The settings you configured via menus are loaded onto
the destination recorder.
8
7
6
5
4
3
<COPY MENU SETTINGS>
DVR TYPE VER. SA16-04
SAVE MENUS TO CF ->
LOAD MENUS FROM CF ->
COPY RECORDING AREA SETTINGS: NO
*IF YOU CHOOSE "YES" OF THE ABOVE MENU,
HARD DISK WILL BE INITIALIZED !
q
w
e
r
2
1
0̲3716QG̲US̲GB 05.11.11 11:48 AM ページ 17
