- 13 -
DISASSEMBLY INSTRUCTION
Idler Arm
Main Chassis Ass'y
Fig. 3-10-B
Fig. 3-10-C
Fig. 3-10-D
Chassis Spring
Main Chassis Ass'y
NOTE
1.
2.
3.
In case of the Idler Arm installation, install as the circled
section of Fig. 3-10-B.
In case of the Idler Arm Spring installation, install as the
circled section of Fig. 3-10-C.
In case of the Chassis Spring installation, install as the
circled section of Fig. 3-10-D.
Idler Arm Spring
Main Chassis Ass'y
Fig. 3-11-A
• Screw Torque: 1 ±
0.5kgf•cm
3-11: FEED MOTOR (Refer to Fig. 3-11-A)
Remove the 2 screws .
Remove the Feed Motor.
Remove the Motor Gear.
1.
2.
3.
Motor Gear
Feed Motor
Main Chassis Ass'y
NOTE
1.
2.
In case of the Motor Gear installation, check if the value
of the Fig. 3-11-B is correct.
When installing the Feed Motor, check if the cable is
positioned as Fig. 3-11-C.
Fig. 3-11-B
6.1 0.1mm
Safety surface for pressing
of the insert.
Feed Motor
Motor Gear
Fig. 3-11-C
Main Chassis Ass'y
Feed Motor
Pass the cable
between 2 pins.
1
1
1
