Sanyo DC-TS3000, Service Manual

Page: 13 / 104

- 12 -
DISASSEMBLY INSTRUCTION
3-10: IDLER ARM (Refer to Fig. 3-10-A)
Remove the Idler Arm Spring.
Remove the Chassis Spring.
Remove the Idler Arm. 1.
2.
3.
Fig. 3-10-A
Idler Arm
Idler Arm Spring
Chassis Spring
Main Chassis Ass'y
NOTE
1.
2.
In case of the Idler Gear installation, install correctly as
Fig. 3-9-B.
When installing the Middle Gear 2, check if the Middle
Gear 2 is locked correctly as Fig. 3-9-C.
Fig. 3-9-B
[OK] [NG]
Idler Gear Idler Gear
Idler Arm Idler Arm
Fig. 3-9-C
Middle Gear 2
Check Lock
Unlock the support .
Remove the Middle Gear 1/2/3, Idler Gear and Feed
Gear. 1.
2.
Middle Gear 1
Middle Gear 2
Middle Gear 3
Idler Gear
Feed Gear
Fig. 3-9-A
Main Chassis Ass'y
3-8: RELAY PCB ASS'Y (Refer to Fig. 3-8-A)
Remove the screw .
Remove the Relay PCB Ass'y. 1.
2.
Fig. 3-8-A
Relay PCB Ass'y
Main Chassis Ass'y
NOTE
1. When installing the wire of the Relay PCB, install it
correctly as Fig. 3-8-B.
Fig. 3-7-B
Fig. 3-7-C
Should not be engaged.
Check the position of
the Rack Feed Lever.
Moving smoothly
Moving smoothly
Fig. 3-8-B
NOTE
1.
2.
After the assembly of the Rack Feed, check if the Rack
Feed 1/2 is moving smoothly.
(Refer to Fig. 3-7-B)
In case of the Rack Feed Ass'y installation, install
correctly as Fig. 3-7-C.
1
1
1
1
3-9: GEAR (Refer to Fig. 3-9-A)