n
INSTALLATION For DIN size cutout)
No.
Parts Name
Trim Panel
M o u n t i n g B r a c k e t
Plastic Spacer
Metal Strap
2. Installation of Bracket
2-1. Insert mounting bracket
into DIN-standard cutout 182 x 53mm in the dash-
board or a console.
2-2. If required, use plastic spacer
between mounting bracket and dashboard.
(Fig. 2)
(When the part
set up to the DIN-standard cutout is loose)
2-3. Bend frame straps
of mounting bracket to the outside until the frame is
in the cutout. (Fig. 3)
RACKET
(Side view)
Fig. 2
Fig. 3
3. Fix the metal strap
to the back of product and insert it into the part @from
the front. Please make sure that it is inserted to the end. (Fig. 4)
Fig. 4
4. Screw the metal strap
to the car body.
