23.Panel protection
---The LCD panel used in this product is made of glass. Therefore, it can
break when the product is dropped or impacted upon by other objects. Be careful not to be
injured by broken glass pieces in case the LCD panel breaks.
24.Pixel defect
---The LCD panel is a very high technology product, giving you finely detailed pictures. Occasionally, a few non-active
pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your
product.
Important Safety Precautions
(continued)
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
NEC—NATIONAL ELECTRICAL CODE
< If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with
respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding
electrode.
< An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can collide with such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits, as contact with them might be fatal.
22. Power source
---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure
of the type of power supply to your home, consult your product dealer or local power company. For added protection for this product
during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect
the cable system. This will prevent damage to the product due to lightning and power line surges. When the unit has to be used with
another power supply voltage, the power cable must be changed. Consult your product dealer. The socket outlet should be installed
near the equipment and easily accessible. Use only the power cord designated by our dealer to ensure safety and EMC. When
connecting other products such as VCRs and personal computers, you should turn off the power of the unit for protection against
electric shock.
4
Summary of Contents for AVL-278
Page 11: ......
