Sanyo AVC-100, Installation And Operation Manual

Page: 17 / 65

28 27
RESETTING THE UNIT
To use for the first time, or after replacing the car battery or changing the connections, resetting is
necessary. After detaching the front panel, (
z
See p.31) push the
t
button by using a pointed
object (ex. ball point pen).
t
button
Do not use a needle or push the button too strongly.
t
CAUTION
¡ When the
t
button is pushed, all the setting memory are lost and you have to Reprogrammed.
¡ It takes about 10 seconds to resetting after the
t
button is pushed.
¡
After the resetting is completed, press the
A
button to confirm that the monitor opens up
properly.
Hint
Press
A
button.
1
OPENING UP THE MONITOR
OPENING UP/CLOSING THE MONITOR
: The monitor slides out of the unit and opening up.
Press
A
button.
: The monitor retracts automatically, and you can use only the audio functions of the unit.
1
CLOSING THE MONITOR
This function cannot be operated by the remote controller.
Hint
Do not close your fingers to the monitor while it is opening or closing.
Damage to the unit or injury may result.
t
CAUTION
When turning on the ignition, the unit is power on, and the warning message appears on the screen.
A
button
WARNING !
TO AVOID RISK OF ACCIDENT OR
POSSIBLE VIOLATION OF LAWS,
DO NOT OPERATE DEVICE
IF IT IS VISIBLE TO THE DRIVER.
INTR
ODUCTION
#AVC-100(GB)P000〜043 05.6.27 1:20 PM ページ27