Sanyo audio system Instruction Manual Download Page 6

Page: 6 / 44

LOCATIONS OF CONTROLS AND INDICATORS

Digital Display

Mode display

Warning display

N flashes:

Mode changed to non-recording
mode while recording was in progress.

M flashes: Problem with mechanism.

V flashes:

Video loss has occurred.

A flashes:

Alarm recording in progress.

When alarm recording finishes, AL
lights.

AL flashes during alarm recording.

NOTES:

The warning details appear according to the
(WARNING OUT/EJECT SET) menu setting.

The warning display has priority over other
types of display. (Refer to “WARNING OUT
Terminal” on page 36.)

To cancel the display press the STOP button.

Recording/playback
speed mode

Alarm search
setting display

Alarm scan setting
display

Day/Time search
setting display

Time display (No tape)

Linear time counter
display (Tape inserted)

Dew display

Tracking control
display

Data transfer speed
setting display

Address setting display

Power failure indicator

Lights after a power failure.

NOTE:

To cancel the “P” display, press the MENU
RESET button.

Security lock indicator

Lights when the security lock is engaged.

T/D

OFF

T/D

NF4Q/NA (SRC-850A GB) Tue. Sept., 10/2002

English

Summary of Contents for audio system













































Search results

Summary of Contents for audio system

Reviews:

Related manuals for audio system

Brands by name

Popular brands

Sanyo audio system, Instruction Manual

Search results

Summary of Contents for audio system

Reviews:

Related manuals for audio system

Brands by name

Popular brands