_
4. USING THE UPS (BASICS)
_
20
Step
Operation
Remarks
5
5
Turn on the power of the load equipment.
Load equipment is normally used in this state.
If a power outage occurs, the connected load equipment is backed up.
If the UPS state is as described below when the
power of the load equipment is turned on, the load
equipment connected to the UPS exceeds the rated
capacity of the UPS. Reduce the amount of
connected load equipment.
• Buzzer sound: Beep-beep-beep-beep
Beep-beep-beep-beep . . .
• [O.L. (red)]: Lit
6
6
Return the control panel cover to its original position.
Be sure to return the cover to its original position to
prevent accidental operation.
[LOAD LEVEL(%)] is lit in
accordance with the connected load
capacity.
Make sure that the capacity does
not exceed 100%.
