manualshive.com logo in svg

SANY SY95C, Operation And Maintenance Manual

The SANY SY95C is a heavy-duty excavator built for efficiency and durability. Ensure optimal performance with our comprehensive Operation and Maintenance Manual, available for free download at manualshive.com. This manual provides detailed instructions and guidelines to assist you in operating and maintaining your SY95C, ensuring its longevity and performance.

Share
Download
background image

3-10

MACHINE CONTROLS

SY95C Excavator OMM

Machine Configuration Screen

0003110

Figure 3-12

Accessed from the Main Menu screen, the Machine 
Configuration screen displays machine model number, 
serial number, and control system information.

Press the button below the return icon (1) to return to the 
previous screen.

Failure Codes Screen

0003822

Figure 3-13

The Failure Codes screen is accessed from the Main 
Menu screen.

When a failure occurs, the failure information icon will 
change color to blue and the failure code will be 
displayed on the home screen.

The Failure Codes screen displays possible failure 
codes.

Press the button below the return icon (1) to return to the 
previous screen.

NOTE: 

SPN and FMI codes are engine diagnostic failure 

codes.

1

1

Summary of Contents for SY95C







































































































































































Reviews:

No comments

Related manuals for SY95C

Brands by name

Popular brands

Load more brands