18
17
How to Use Each Feature
How to Use Each Feature
How to Use Each Feature
(P.18)
(P.29-34)
(P.39-40)
(P.19)
(P.20)
(P.37)
(P.21)
(P.22-24)
(P.25-28)
D/R
SETTING
SPEED
CURVE
F/S
BASE
FUNC
AUX
(P.35)
(P.36)
(P.38)
SELECT
MODEL
NAME
COPY
CLEAR
TIMER
(P.41)
(P.42)
(P.42)
LOGGER
TELEMETRY
ALERT SETTING
TELEMETRY SETTING
(P.43-44)
(P.45-46)
(P.47)
(P.47)
(P.48)
(P.48)
BIND
SYSTEM
KEY ASSIGN
BUZZER
BATTERY
LCD
CALIBRATION
Set up all
items of the
accessory
channels of
3ch/4ch.
Various timer
setups and lap
display menu.
Sw1
Sw3
Sw2
Trm2
Trm1
Trm3
TRIM 3
(TRM 3)
ENTER
⇒
*Make sure that the servos do not
lock to make clicking sound!
Note) The same for throttle.
Note
• If the linkage is locked for a long period, it
can cause the servo motor breakage.
• Adjust the end point of the steering/throttle linkage before adjusting dual rates (P. 23, 24).
SUPPLEMENT
Steering Dual Rate Display
Steering Dual Rate Display
ABOUT THE MENU STRUCTURE
DUAL RATE [D/R]
SETTING
●
The user can set up features and do model memory call easily by using each key.
●
The Menu consists of Setting, AUX, Model, Timer, Telemetry and System Menu, and related features are
included in each menu.
●
You can adjust steering angle when operating the steering wheel and throttle trigger to their peak.
Please adjust the steering angle to fit RC car and surface condition when driving.
*You can adjust steering for both right and left at the same time and throttle separately for high and brake
sides. You can also adjust the brake side more precisely than adjusting with EPA.
●
Don't increase the setting rate of dual rates (D/R) from the condition in which the linkage locks by
operating the steering wheel and throttle trigger.
●
You can also adjust more precisely by adjusting dual rates of the throttle side.
*A1 and A2 cannot be set even moving to D/R on A1 and A2 page.
1
) Select features [ST/TH/BR] to adjust with the up and down key.
2
) Determine the feature to adjust with the Enter key. Adjust the valus of DUAL RATE by up and down key.
3
) During operation, the steering dual rates can be adjusted with Trim 3. It's possible to assign other features
to Trim 3 with the key assign trim feature (P. 46).
*When cancelling a selected feature, operate the Back key.
*Depending on car types, dual rate is not assigned to TRIM3.
○
Setting Range:
ST/TH: 0%
～
100%
BR: 0%
～
120%
○
Default:
ST/TH/BR: 100%
Summary of Contents for MT-R RX-493i
Page 1: ...Sw1 Sw3 Sw2 T r m 2 Trm1 T rm 3 ...
Page 31: ...1 6 30 2022 670A14984A ...
