manualshive.com logo in svg

Sanwa M11X, Operating Manual, Page: 45 / 67

Share
Download
Sanwa M11X Operating Manual Download Page 45

Page 45

servo monitor

Function Page 2 (SERVO)

1) 

2) 

The Servo Monitor function displays the output levels of the four different channels in bar graph form, allowing you to monitor servo

operation in a virtual manner. This allows you to see servo movement and make setting changes without having the receiver

turned on. When used in conjunction with the Display Switch, the Servo Monitor function allows you to see servo movement  virtually

and make setting changes without the transmitter actually transmitting a signal. Using the Servo Monitor function while making

setting changes can slso make it easier to understand the setting changes you’re making.

Moving the different transmitter controls will display the actual movement

on the Servo Monitor in the Programming Window.

Press the Function key to highlight the SERVO menu.

3)  Press the     key to display the Servo Monitor function screen in the Information Window. This allows you to view the Servo

Monitor function while making setting adjustments in many of the Programming Menus.

Servo

Monitor

Programming

Window

Information

Window

The Servo Monitor function screen can be displayed in the Information Window while in the following Programming Menus:

Function Page 1

EXP
ARC
SPEED
ALB
TR-CTL

Function Page 2

SUB-T
TIMER*
REV
S-POS
TH-HLD
BR-MIX

Function Page 3

VR-ADJ
BATT

*Cannot be displayed in the [LAP] sub-menu.

Servo Reversing (REV) is not reflected in the Servo Monitor. The indications on the graph shows the direction of the

rransmitter input control (Steering Wheel, Throttle Trigger, Auxiliary Function, and 4th Channel Brake).

D-RATE
EPA

SERVO

If the bar graph always shows an amount of servo movement in one direction even though the servos are centered,

the graph could be displaying the amount of servo Sub-Trim for that particular channel.

pressing the      key will move the cursor back instead.

While in a Programming Menu that does not support the

Servo Monitor being displayed in the Information Window,

Summary of Contents for M11X




































































Reviews:

No comments