manualshive.com logo in svg

Sanwa M11X, Operating Manual, Page: 35 / 67

Share
Download
Sanwa M11X Operating Manual Download Page 35

Page 35

track timers

Stopping the Lap Timer

1)  The Lap Timer can be stopped using three different methods:

 

A)  By pressing the Lap Timer switch after the GOAL Time is reached.

 

B)  By pressing and holding the Lap Timer Switch for 3 seconds.

 

C)  By pressing the INC/+ and DEC/- keys at the same time.

When the Lap Timer is stopped, the Lap Timer function is automatically turned OFF. To turn the Lap Timer function back 

ON, see Turning On the Lap Timer on the previous page.

verifying Lap Timer Results

1)  Lap Timer results can be checked by pressing the    key in 

the TIMER LAP menu while the Lap Timer is stopped. The 

display shows lap times for 9 different laps on each page. 

Press the INC/+ or DEC/- keys to scroll through the different 

pages.

Press the INC/+ and DEC/- keys at the same time to return the display to the first 9 laps.

[INT] INTErvAL TIMEr

The 

Interval Timer notifies you when a set interval elapses while you are driving, giving you an idea of how close you are to your 

target time. There are two separate Interval Timers. One Interval Timer for minutes and seconds, and one Interval Timer for 

seconds and milliseconds. Both Interval Timers can be used simultaneously and different Tones can be assigned to each.

The Lap Timer Switch can be assigned to another Push-Button switch, using the Key Assign function. See page 50 for 

more information.

Sw 3

The Cumulative Time cannot be manually cleared. It will be automatically cleared when the Lap Timer is restarted.

Starting the Lap Timer

1)  In  the  default  configuration,  the 

Lap  Timer  Switch  is  assigned  to  Sw  3.  To  start 

the Lap Timer, press the Lap Timer Switch. The Lap Timer will start counting up. 

Pressing the 

Lap Timer switch a second time will store the first Lap Time, then begin 

counting a second Lap Time and display the Cumulative Time. Each time you press 

the Lap Timer Switch, the previous Lap Time is stored, a new Lap Time begins, and 

the Cumulative Time is displayed.

Each time you press the Lap Timer Switch, the switch is deactivated for 3 seconds.

Turning On the Interval Timers

1)  Press the Function key to move the cursor to [INT] in the Programming 

Window. The cursor will default to OFF.

2)  Press INC/+ or DEC/- keys to turn the Interval Timers ON.

 

Press the      key to return to the TIMER LAP menu.

Summary of Contents for M11X




































































Reviews:

No comments