11
4
3
3 in.
(75 mm)
7/32 in.
(5.5 mm)
17
18
19
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT
: Be sure to drill into the center of the studs.
IMPORTANT
: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4. Install wall plate
17
using four lag bolts
18
and four washers
19
. Tighten the lag bolts only until they are pulled firmly against the wall
plate.
CAUTION:
Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts
.
