13
STEP 2
3. Drill pilot holes.
IMPORTANT:
Pilot holes must be drilled to a depth of 63.5 mm (2½ in.), using a 3 mm (1/8 in.) diameter drill bit.
4. Tighten the lag bolts
16
only until they are pulled firmly against the wall plate
15
.
CAUTION:
Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
3
4
14
15
63.5 mm
(2
½
in.)
3 mm
(1/8 in.)
16
