98140 US 3.4 - 12 2010
8
/ 20
www.santos.fr
CLEANING:
IMPORTANT
:
In every case, the machine should be stopped and the machine's power
supply cable (10) unplugged.
Cleaning with a water spray or pressure spray is not permitted
Clean the dose measurer properly using a brush.
Make sure that the walls of the coffee delivery conduits and the 6 branches of the
cross-bars are always clean.
MAINTENANCE
Before carrying out any work on the machine, it is essential to unplug it from the mains
and to discharge the motor starting capacitor.
IMPORTANT
:
Use of spare parts other than certified original SANTOS
parts is prohibited
Discharging the capacitor:
Unscrew the 2 screws located under the machine in the middle of the base plate
(fig. E).
Pull the electrical components unit (20) out of the base plate.
Using a screwdriver with an
insulated handle
, touch the 2 capacitor connections
(15). The sight of an electric arc shows that the capacitor has been discharged.
Spare parts:
This machine requires no specific maintenance. The bearings are lubricated for life.
If work is required to replace worn parts such as the grindstones or the electric or other
components, refer to the parts list (see exploded view at the end of the manual).
For
all spare part orders
(see references in the exploded view at the end of the manual),
state:
the type,
the machine serial number and
the electrical specifications
(
16
)
recorded under the machine.
Replacing the grindstones:
IMPORTANT
: always change both 2 grindstones (9) at the same
time. (use SANTOS reference 00001B)
!
!
408004 en ma 2010.12
8/20
