11
12.0 ACCESSORIES
The heater can be used to supply several hot water outlets via conventional taps.
It is not recommended for supplying a shower. Individual site demands should be
considered when choosing capacity and the number of outlets to be served.
A Thermostatic Mixing Valve can be used in conjunction with this unit. Accessory
Pack ALK03 (94970010) is recommended. Follow the installation instructions sup-
plied with the valve for connection to the system.
13.0 USER INSTRUCTIONS
13.1
This Santon unvented water heater stores water at the temperature set on the
adjustable thermostat. This can be set to give temperatures in the range of 6
o
C to 66
o
C. To avoid any risk of freezing when the heater is not in use for long
periods during the winter months, do not switch off the electrical supply and set
the thermostat to its minimum position. N.B. This will not protect other system
pipework.
13.2
The indicator light will be illuminated when the unit is heating.
13.3
To ensure the heater continues to operate at its optimum performance it should
be periodically maintained in accordance with the instructions given under the
Sections headed MAINTENANCE.
13.4 IMPORTANT NOTES TO USER
Do not block or restrict the discharge from any safety valve fitted.
Do not tamper with any safety valve fitted.
If water discharges from any safety valve fitted, switch off the electrical
supply to the unit immediately. Contact a qualified installer. Do not turn the
electrical supply on again until the unit has been checked and approved by a
qualified installer.
11