Bedienungsanleitung / User manual VTC-512D
_________________________________________________________________________________
- 20 -
1. Camera installation
1.1 General
This camera is a colour discrete camera in a motion detection housing. It has been
developed for indoor applications in video surveillance systems. This camera is ideal for
locations where a discrete video surveillance of intruders is required.
You will find the technical specifications at the end of this manual.
Bracket and camera installation
Fix the camera onto a solid basis which is capable to carry the weight of the camera. Ensure
that the camera is safely installed by using only suitable screws.
Power supply and monitor impedance
Only use a stabilised power supply unit with sufficient wattage (see “Technical specifications”
for recommended power supply). Only approved cables should be used.
If a monitor is connected directly, the monitor impedance has to be set to 75 Ohm. Verify the
position of the switch in case the video picture is of poor quality.
The BNC jack is for the video output (1 Vpp at 75 Ohm).
Camera housing: How to open it
If you want to open the housing, please pull off the front part of the housing by pulling it
carefully forward.
Before opening the camera, disconnect it from power supply!
Improper handling of the appliance will invalidate the warranty.
