User manual
SNVR-1412P, SNVR-1812P
_________________________________________________________________________________
- 19 -
PTZ directions:
You may use the 8 direction buttons (arrows) for PTZ control by clicking on them.
In the center of the direction buttons, there is a 3D positioning button.
If you click here, the camera image is displayed in full screen. Press and hold the left
mouse key to draw a frame into the image. This are can be displayed at 16x speed.
The smaller the selected frame/area, the higher the speed.
Setting presets, tours, patterns, etc:
If you click on the arrow at the right hand side of the PTZ menu, the menu is extended as
follows:
Symbol
Function
Symbol
Function
Preset
Flip
Tour
Reset
Pattern
Aux config.
Autoscan
Aux on/off
Autopan
Call-up menu